The Omega Group (Operations) Limited is a UKAS accredited testing laboratory No. 7644.
Concrete blocks with handwritten numbers are arranged in rows. They vary in shades of grey and beige, conveying an industrial, testing atmosphere.
  1. Home
  2. Onsite & Laboratory Testing Services

Services

Onsite & Laboratory Testing Services

The Omega Group specialises in testing hardened & fresh concrete on-site, diamond drilling & materials testing in accordance with British & European standards.

Independent Laboratory Testing

An ever-growing range of quality assured testing services

The Omega Group offers comprehensive site and laboratory testing services for the civil engineering and construction sectors. From fresh and hardened concrete testing and investigation to materials testing and cube manufacture training. If you're unsure about the type of testing you need, call or WhatsApp our friendly team to get the answers you need quickly.

Call 01327 552077 WhatsApp 07830 322077

525,000+Cube samples crushed
99.9%Reports emailed on test day
2010Laboratory established
No. 7644UKAS accredited testing laboratory
Every service

Choose where the work happens

Our technicians test on your site, our laboratory tests in Daventry, and the cubes travel between the two in our own vans. Filter the list, or read it all.

* For a full list of our UKAS-accredited activities, please visit our UKAS Accreditation page.

Not sure?

Which test do I need?

Pick the question closest to yours and the right service appears alongside. Still unsure? Call or WhatsApp our friendly team and we will point you to it.

Question 01 of 07Our answer

Onsite Concrete Testing

A CSCS-certified technician samples and tests beside the pour, slump cone testing included, and makes the cube samples there and then.

Question 02 of 07Our answer

Concrete Cube Testing

We collect cube samples from any site in the UK, cure them in temperature-controlled water and test them in our Daventry laboratory. The PDF test report is issued on the same day as cube crushing.

Question 03 of 07Our answer

Diamond Drilling and Core Cutting

Diamond-tipped core barrels cut samples of various diameters and depths for compressive testing. A Schmidt rebound hammer survey gives a non-destructive first look.

Question 04 of 07Our answer

Particle Size Distribution PSD

Sieve analysis grades the material and checks the particle size distribution against the specified standard.

Question 05 of 07Our answer

Laboratory Trial Mixes

Independent concrete trial mixes from your mix designs, using calibrated equipment in our fully equipped materials laboratory.

Question 06 of 07Our answer

Concrete & Cube Making Training

Training on your site to sample fresh concrete, slump cone test, and correctly make and cure solid cube samples, in line with British Standards.

Question 07 of 07Our answer

Steel Mould Calibration Service

Deep cleaning and in-house calibration of 100mm and 150mm steel cube moulds, with a quick turnaround.

How it fits together

From the pour to the report

Most projects use the services in this order. Each stage hands the specimen to the next, and every one is recorded in Omega Connect, our in-house laboratory system.

1

Sampled and tested at the pour

Fresh concrete is sampled and tested on site by CSCS-certified technicians, and the cube samples are made there, in calibrated moulds.

A technician collecting fresh concrete from the chute of a mixer on site.
2

Collected from any site in the UK

Hardened cube samples are collected from any construction project or site and transported safely to our Daventry test laboratory.

Omega Group vans parked outside the Daventry laboratory.
3

Cured and crushed in Daventry

State-of-the-art water curing, then UKAS-accredited compressive strength testing of each cube.

A 100mm concrete cube under load in a compressive testing machine.
4

Reported on the same day

Detailed analysis and a PDF test report issued on the same day as cube crushing.

Printed Entry, Completion and Concrete Cube Test Report documents on a desk.